No overselling, no guesswork — just a Heat Pump Repair crew that diagnoses it right the first time. Same-day appointments available across Trimble and the surrounding zip codes.
Our Trimble dispatcher asks a few quick questions to gauge urgency and get you the fastest available window.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. We invest in ongoing training so our techs recognize a failing capacitor, a cracked heat exchanger, or a refrigerant leak before it turns into an emergency.
You won't find us buried under layers of call-center scripts — we're the team that shows up in the truck, not a subcontractor we've never met. Licensing and insurance aren't optional line items for us, and we keep that documentation available on request for every job, big or small.
Trimble's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Trimble and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. We track arrival windows, callback rates, and repeat-issue complaints internally so problems get caught before they become patterns, because a customer who trusts us once tends to call us again — and Trimble is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Trimble rooftop unit. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
We cover the full range of heating, cooling, and air quality work Trimble properties actually need.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Trimble dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
We keep the truck stocked with the parts that fail most often on the equipment common to Trimble homes, which is exactly why most repairs don't require a return visit.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Trimble homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services multi-zone commercial buildouts across Trimble, with after-hours work to avoid disrupting business.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
Most emergency breakdowns start as a small, ignorable warning sign months earlier. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Trimble households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
This is the standard every Trimble technician on our team is held to.
If the same issue returns within the warranty period, we come back and fix it at no additional labor cost.
We quote a flat rate before work begins and that number doesn't change once you approve it.
If anything feels off after we leave, one call gets a tech back to your Trimble address.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
This is one of the most common complaints we hear on service calls across Trimble.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
This is one of the warning signs we recommend not waiting on.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
No inflated "emergency surcharge" games — the number we quote is the number you pay.
Emergency calls get moved to the front of the line automatically.
If something isn't right after we leave, we come back and make it right.
Every technician carries current state licensing and manufacturer training.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
A snapshot of the feedback that keeps us accountable.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. No pressure to buy a whole new system when a repair was all we needed."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. Never once felt like I was being upsold on something I didn't need."
"They handled the whole install in a single day, exactly like they said they would. Followed up a week later just to check everything was still running fine."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Kept our kitchen running through the weekend rush."
"I appreciated that they didn't try to sell me a bigger unit than I needed. Would use them again without hesitation."
"The tech walked me through what he was checking as he went, which I really appreciated. Genuinely relieved to have found a crew that answers when it matters."
After thousands of service calls across Trimble, a handful of causes show up again and again.
Homeowners who schedule a tune-up ahead of each season tend to call us far less often for emergency repairs. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Our technicians train across the major residential and commercial equipment lines, so you're not limited to a single brand's service network. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Manufacturer-certified across multiple major residential equipment lines.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Yes — every job gets a clear quote before any repair work begins, so there are no surprise line items on the invoice.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
We maintain current credentials because it protects both our customers and our team.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Plan members typically see fewer surprise breakdowns because small issues get caught during routine visits.
Our dispatch area extends throughout the greater Trimble region and nearby towns within Trimble, TN.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
Our technicians are trained across the major residential and commercial equipment lines, not limited to a single manufacturer.
Ask about financing during your in-home estimate to see what fits your situation.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
If you smell gas or burning, shut off the system at the breaker and step outside, then call us immediately.
Ask about current after-hours rates when you call +1-866-805-8548.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
Larger properties get the same upfront pricing and licensed technicians as a single-family service call, just coordinated at scale.
A full system replacement is one of the bigger home expenses most people face, and we don't expect everyone to pay it in a single lump sum. If a rebate or local incentive program applies to your Trimble installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Trimble, TN and near Trimble, there's a strong chance we already service your street.
Property managers with multiple Trimble addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
